Re: [Amps] 240V Outlet

[Gudguyham@aol.com]

In a message dated 8/9/2009 9:49:43 P.M. Eastern Daylight Time,  
km1h@jeremy.mv.com writes:

Going to  #10 requires 
>> all different plugs and outlets and the cost about  goes thru the roof 
>> compared to a 20A  feed.



No really because you can run #10 wire from a breaker panel to a location  
where an amp is to avoid voltage drop and then simply use a 20A breaker and 
plug  on that wire.  You don't have to use 30A breaker or  plug.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps