To: | jimsmitheguard-a@yahoo.com, amps@contesting.com, jim@audiosystemsgroup.com |
---|---|
Subject: | Re: [Amps] 240V Outlet |
From: | Gudguyham@aol.com |
Date: | Mon, 10 Aug 2009 08:08:31 EDT |
List-post: | <amps@contesting.com">mailto:amps@contesting.com> |
In a message dated 8/10/2009 2:00:30 A.M. Eastern Daylight Time, jimsmitheguard-a@yahoo.com writes: Yes, if the ground is also #12 or larger. You can (and should) also change the outlets. Code allows for 15A outlets to be used on a 20A branch circuit as long as there are more than one outlet on the chain. If a single outlet is connected to a 20A circuit and it's the "only" outlet on the circuit, then it must be rated 20A. At least with 120v branch circuits. _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: [Amps] I need transfer switch information, Roger |
---|---|
Next by Date: | Re: [Amps] I need transfer switch information, Gudguyham |
Previous by Thread: | Re: [Amps] 240V Outlet, jimsmitheguard-a |
Next by Thread: | Re: [Amps] 240V Outlet, Carl |
Indexes: | [Date] [Thread] [Top] [All Lists] |