That only partially works for CW. The phone man needed a healthy choke and
the no RF balance point only works on paper anyway.
Carl
KM1H
----- Original Message -----
From: "Bill, W6WRT" <dezrat1242@yahoo.com>
To: <amps@contesting.com>
Sent: Monday, August 10, 2009 3:23 PM
Subject: Re: [Amps] plate bypass capacitor
> ORIGINAL MESSAGE:
>
> On Mon, 10 Aug 2009 14:59:45 -0400, "Carl" <km1h@jeremy.mv.com> wrote:
>
>>10X the RL was the way it was done and all the old BA rigs had 1 to 2.5mh
>>plate chokes. That was for the old style series fed plug in coil tanks.
>
> REPLY:
>
> If you mean the series feed where there is a bypass cap at the junction of
> the
> tank circuit and RF choke, there is very little RF there and practically
> any
> choke will do. Or if the bypass cap is large enough, no choke at all.
>
> 73, Bill W6WRT
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|