Rob
I have my 1968 Raytrack DX2000L on the 'bench' and I have it pretty much
going, it is now putting out about 900-1000 watts into a Heath Cantenna
measured by an MFJ which was once (years ago ) ck'd against a Bird at 500
watt level into the same cantenna and wires...
Now that I have a scope I thought about using it to ck the PEP. Can you
hook the scope directly to the rca jack on the cantenna or is another method
needed?
Here are some pix of the Raytrack
*http://tinyurl.com/oq59my*
How does PEP power 'normally' relate to Key Down CW power output?
Paul K3PG
Message: 2
Date: Fri, 2 Oct 2009 12:47:19 -0500
From: Rob Atkinson <ranchorobbo@gmail.com>
Subject: Re: [Amps] PEP Wattmeter
To: amps@contesting.com
Message-ID:
<d2bb1cb80910021047x2e73e1f1k8eaaef02bfef91af@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1
How much can you afford to spend? Want a cheap PEP wattmeter? two
words: used oscilloscope. Accuracy? Reference it to RF ampmeter
reading of some cw RF on a 50 ohm load.
73
Rob
K5UJ
--
Paul Gerhardt
K3PG
http://pgerhardt.blogspot.com
QRP ARCI 6674
FP 274
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|