Amps
[Top] [All Lists]

Re: [Amps] PEP Reading Wattmeter

To: "Steve Thompson" <g8gsq@f2s.com>, <amps@contesting.com>
Subject: Re: [Amps] PEP Reading Wattmeter
From: "Jim Tonne" <tonne@comcast.net>
Date: Mon, 5 Oct 2009 16:52:27 -0400
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Regarding this power measurement thing, I 
remember using the calorimeter method while
I was at Continental Electronics.  All the rigs of
100 kW and above were measured that way.

I agree with the general comments about how
the specs can be almost anything.  But how 
truthful they are might also be almost anything.

- Jim W4ENE


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>