Amps
[Top] [All Lists]

Re: [Amps] Dummy Loads & Wattmeters

To: "'Jim Tonne'" <tonne@comcast.net>, "'Carl'" <km1h@jeremy.mv.com>, "'Steve Katz'" <stevek@jmr.com>, <dhallam@rapidsys.com>, "'AMPS List'" <amps@contesting.com>
Subject: Re: [Amps] Dummy Loads & Wattmeters
From: "Alex Eban" <alexeban@gmail.com>
Date: Thu, 3 Dec 2009 10:56:46 +0200
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Well, it's bound to!
Carborundum is the name of the material also! It is a crystalline  substance
and most of these exhibit some non linearities. No wonder it's an harmonic
generator.
Alex    4Z5KS

-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
Behalf Of Jim Tonne
Sent: Thursday, December 03, 2009 12:08 AM
To: Carl; Steve Katz; dhallam@rapidsys.com; AMPS List
Subject: Re: [Amps] Dummy Loads & Wattmeters


Not exactly on-topic but if you are doing output harmonic measurements
remember that Carborundums generate a little bit of harmonic content
themselves.
They are a teeny bit nonlinear.

- Jim W4ENE



> I also have some brand new military packaging sealed 50 Ohm 50W 
> Carborundums that measured 68 Ohms
> upon opening.   They still make great swamping resistors 
> or for parasitic suppressors.




_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>