Amps
[Top] [All Lists]

Re: [Amps] Russian Power Tubes

To: <dezrat1242@yahoo.com>, "amps fourm" <amps@contesting.com>
Subject: Re: [Amps] Russian Power Tubes
From: "RICHARD GEORGE" <k6kwq@msn.com>
Date: Tue, 15 Dec 2009 17:49:15 -0800
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Funny thing I worked as an engineer for 42 years.
This is ham radio not space shuttle engineereing.

K6KWQ Dick
 Amps by "MORE POWER"
  ----- Original Message ----- 
  From: Bill, W6WRT<mailto:dezrat1242@yahoo.com> 
  To: amps fourm<mailto:amps@contesting.com> 
  Sent: Tuesday, December 15, 2009 5:04 PM
  Subject: Re: [Amps] Russian Power Tubes


  ORIGINAL MESSAGE:

  On Tue, 15 Dec 2009 13:03:33 -0800, "RICHARD GEORGE" 
<k6kwq@msn.com<mailto:k6kwq@msn.com>> wrote:

  >
  >The GS-35B will run for ever at 4KV with no problems.  I have built dozens 
of amps for VHF and UHF using this tube and running 4KV+ on the anode. 

  REPLY:

  If you ever apply for a job as a design engineer you might want to leave that
  off your resume.  :-)

  73, Bill W6WRT
  _______________________________________________
  Amps mailing list
  Amps@contesting.com<mailto:Amps@contesting.com>
  
http://lists.contesting.com/mailman/listinfo/amps<http://lists.contesting.com/mailman/listinfo/amps>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>