Re: [Amps] Russian Power Tubes

["David H Craig" <davidhcraig@verizon.net>]

        I guess empircal evidence isn't germain to this discussion.... must 
be flat-earth "theory."    I have some PE friemds that run close to 5KV on 
the plate of a pair of GS35Bs on 50 MHz... again. I assume it irrelevant to 
the "theory" gods.
        Dave N3DB


> Funny thing I worked as an engineer for 42 years.
> This is ham radio not space shuttle engineereing.
>
> K6KWQ Dick

>
>
>  ORIGINAL MESSAGE:
>
>  On Tue, 15 Dec 2009 13:03:33 -0800, "RICHARD GEORGE" 
> <k6kwq@msn.com<mailto:k6kwq@msn.com>> wrote:
>
>  >
>  >The GS-35B will run for ever at 4KV with no problems.  I have built 
> dozens of amps for VHF and UHF using this tube and running 4KV+ on the 
> anode.
>
>  REPLY:
>
>  If you ever apply for a job as a design engineer you might want to leave 
> that
>  off your resume.  :-)
>
>  73, Bill W6WRT
>  _______________________________________________
>  Amps mailing list
>  Amps@contesting.com<mailto:Amps@contesting.com>
> 
> http://lists.contesting.com/mailman/listinfo/amps<http://lists.contesting.com/mailman/listinfo/amps>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps