MIKE DURKIN wrote:
> Is there a way to tell externally if a tube has been used ... Im guessing not
> unless it was abused.
>
Like many high power tubes, you can tell if they were put in normal
sockets as the proper sockets use finger stock which will leave vertical
marks on the contact rings every time the tube is put in and taken out
of the socket.
Nor should they "rattle" when tipped back and forth.
73
Roger (K8RI)
> I just bought a GS-35B.
>
> Mike
> KC7NOA
>
> _________________________________________________________________
> Hotmail: Free, trusted and rich email service.
> http://clk.atdmt.com/GBL/go/196390708/direct/01/
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|