Amps
[Top] [All Lists]

Re: [Amps] 'good engineering'

To: <donroden@hiwaay.net>
Subject: Re: [Amps] 'good engineering'
From: "Zeitler, Lane LT, FST-1" <zeitlel@cpr3.navy.mil>
Date: Sun, 28 Mar 2010 20:03:50 -0800
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Better get busy constructing some heavy duty open wire feeders while you
are at to feed your antenna. I am thinking 8 gauge stranded would work
great, say, with 3 to 4 inch spacing. 

Lane
Ku7i

-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com]
On Behalf Of donroden@hiwaay.net
Sent: Sunday, March 28, 2010 7:03 PM
Cc: Amps@contesting.com
Subject: Re: [Amps] 'good engineering'

Thanks !!  My shack is in a basement room and stays around 60 degrees  
even in the summer. I usually run a 1500 watt space heater.   
Hummmmm.... maybe three 5000s would totally replace the space heater.   
Problem is I only have a single SB-220 transformer.

Don WA4NPL






Quoting "James Colville" <jimw7ry@gmail.com>:

> If you want to run a 562 (7.5 volts @75 amps) watt filament in your
> shack.... That's your prerogative....
>
>
> 73
> Jim W7RY
>
>
>
> On Sun, Mar 28, 2010 at 7:12 PM, <donroden@hiwaay.net> wrote:
>
>> If all I have on hand are a few 4CX5000s with sockets and filament
>> transformers, are you telling me that I should not use them ?
>>
>>  Don WA4NPL
>> > Quoting "Alex Eban" <alexeban@gmail.com>:
>> >
>> >> Tell me guys.
>> >> Who's idiot enough to build a 5 kilowatt amplifier and use it at
the 1,5
>> kW
>> >> level?
>> >> Are we kidding ourselves or not?
>> >> Alex 4Z5KS
>>
>>  _______________________________________________
>> Amps mailing list
>> Amps@contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>>
>

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>