Amps
[Top] [All Lists]

Re: [Amps] 4CX250B Ratings in Dentron Clipperton V

To: Jim Brown <jim@audiosystemsgroup.com>
Subject: Re: [Amps] 4CX250B Ratings in Dentron Clipperton V
From: Robert Morris <robrk@nidhog.net>
Date: Fri, 21 May 2010 15:20:27 -0400
List-post: <amps@contesting.com">mailto:amps@contesting.com>
On 5/21/10 2:15 PM, Jim Brown wrote:
> I've just fired up a Dentron Clipperton V modified for 6M operation per
> Dentron instructions. It uses a single 4CX250B

Remember the filament is 6.000 not 6.3.

Keep an eye out for a 4X250R. Supposed to be more better for linear service.

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>