On 6/1/2010 10:03 AM, Dave Hachadorian wrote:
> I have used one of these. You will definitely need a surge
> limiter for when you turn it on. If you take the top cover off
> and shine a light into the oil, you will see a switch down there
> with selectable taps, in case you want a slightly different
> voltage.
>
> I used mine for about 30 years. The utility company where I
> bought it changed out the oil to non-PCB type when I bought the
> xfmr for $25. That pig has moved from Rhode Island to Los Angeles
> to Yuma.
>
As long as you stay within the ratings of the transformer, it doesn't
care if it's used as a step up or step down transformer.
73
Roger (K8RI)
> Dave Hachadorian, K6LL
> Yuma, AZ
>
>
> --------------------------------------------------
> From: "Martin Flynn"<maflynn@theflynn.org>
> Sent: Sunday, May 30, 2010 11:58 AM
> To: "AMPS List"<amps@contesting.com>
> Subject: [Amps] backwards plate transformer
>
>
>> I picked up a used 5 KVA GE transformer. 2400V primary,
>> 120/240V
>> secondary. With 208 on the secondary (I am running it
>> backwards) I
>> am measuring 2500 unloaded on the primary.
>>
>> Anyone using a backwards transformer for plate& are there
>> other issues
>> I should be on the lookout for?
>> _______________________________________________
>> Amps mailing list
>> Amps@contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|