[Amps] 1 db compression point procedure ?, Jim Thomson, 2010/06/30

• Re: [Amps] 1 db compression point procedure ?, DF3KV, 2010/06/30
• Re: [Amps] 1 db compression point procedure ?, Carl, 2010/06/30
• Re: [Amps] 1 db compression point procedure ?, Tony Brock-Fisher, 2010/06/30
  • Re: [Amps] 1 db compression point procedure ?, Carl, 2010/06/30
• Re: [Amps] 1 db compression point procedure ?, Colin Lamb, 2010/06/30

[Amps] Samsung software, John E. Cleeve, 2010/06/29

• [Amps] Samsung Software, John E. Cleeve, 2010/06/30

[Amps] Help with a meter, K1SG, 2010/06/27

• Re: [Amps] Help with a meter, Jim W7RY, 2010/06/27

[Amps] M1156 Xistor Specs?, Radio WC6W, 2010/06/27

• Re: [Amps] M1156 Xistor Specs?, Jim W7RY, 2010/06/27

[Amps] Nice homebrew 8877, Roger, 2010/06/25

• Re: [Amps] Nice homebrew 8877, Carl, 2010/06/26
  • Re: [Amps] Nice homebrew 8877, Roger, 2010/06/26
    • Re: [Amps] Nice homebrew 8877, Charlie Young, 2010/06/26

Re: [Amps] Amps Digest, Vol 90, Issue 30, BEHIELS JEAN-PIERRE, 2010/06/25

• Re: [Amps] Amps Digest, Vol 90, Issue 30, Bill, W6WRT, 2010/06/25

[Amps] What Is TheOptimum Bias For GS-35b Tubes?, Mel, 2010/06/24

• Re: [Amps] What Is TheOptimum Bias For GS-35b Tubes?, John Lemay, 2010/06/24
• Re: [Amps] What Is TheOptimum Bias For GS-35b Tubes?, Bill, W6WRT, 2010/06/24

[Amps] At last an Antenna designed for QRO, Roger, 2010/06/21

• Re: [Amps] At last an Antenna designed for QRO, Gary K9GS, 2010/06/21
  • Re: [Amps] At last an Antenna designed for QRO, Roger, 2010/06/21
• Re: [Amps] At last an Antenna designed for QRO, ToddRoberts2001, 2010/06/21
• Re: [Amps] At last an Antenna designed for QRO, SECOPSYS, 2010/06/22
  • Re: [Amps] At last an Antenna designed for QRO, Roger, 2010/06/22
• Re: [Amps] At last an Antenna designed for QRO, Patrick, 2010/06/22
  • Re: [Amps] At last an Antenna designed for QRO, donroden, 2010/06/22

[Amps] TL 922 Amp. Other problem in my amp., Eduardo de Vera Mateo, 2010/06/21

• Re: [Amps] TL 922 Amp. Other problem in my amp., Eduardo de Vera Mateo, 2010/06/22

[Amps] For 10 meters only?, Roger, 2010/06/20

• Re: [Amps] For 10 meters only?, Bill, W6WRT, 2010/06/20
  • Re: [Amps] For 10 meters only?, Roger, 2010/06/20
  • Re: [Amps] For 10 meters only?, johndtate, 2010/06/20

[Amps] Cleaning tubes, Ken Brown, 2010/06/17

• Re: [Amps] Cleaning tubes, Ron Youvan, 2010/06/17
  • Re: [Amps] Cleaning tubes, Glen Zook, 2010/06/17
• Re: [Amps] Cleaning tubes, Mike McCarthy, W1NR, 2010/06/17
• Re: [Amps] Cleaning tubes, Carl, 2010/06/17
• Re: [Amps] Cleaning tubes, Colin Lamb, 2010/06/17
  • Re: [Amps] Cleaning tubes, Jim Barber, 2010/06/17
  • Re: [Amps] Cleaning tubes, Patrick Barthelow, 2010/06/17
    • Re: [Amps] Cleaning tubes, Glen Zook, 2010/06/17
  • Re: [Amps] Cleaning tubes, Ron Youvan, 2010/06/17
  • Re: [Amps] Cleaning tubes, Carl, 2010/06/17
    • Re: [Amps] Cleaning tubes, Randall, Randy, 2010/06/17

[Amps] TAP program, Lee Buller, 2010/06/16

• Message not available
  • Re: [Amps] TAP program, Lee Buller, 2010/06/17

[Amps] 3-500Z amp producing output with no input, why?, Bill Dzurilla, 2010/06/16

• Re: [Amps] 3-500Z amp producing output with no input, why?, Vic K2VCO, 2010/06/16
• Re: [Amps] 3-500Z amp producing output with no input, why?, mikea, 2010/06/16

[Amps] Command HF2500 Service, Joe Barnes, 2010/06/13

• [Amps] command HF2500 service, Michael Zeglen, 2010/06/14

[Amps] AMP MODS, richard courtway, 2010/06/13

• Re: [Amps] AMP MODS, Rick Stealey, 2010/06/14

[Amps] SB-220, Jeff, 2010/06/13

• Re: [Amps] SB-220, Dave Hachadorian, 2010/06/13
• Re: [Amps] SB-220, Patrick Barthelow, 2010/06/13

[Amps] Here yah go, Roger, 2010/06/12

• Re: [Amps] Here yah go, Bill, W6WRT, 2010/06/12
  • Re: [Amps] Here yah go, Alek Petkovic, 2010/06/12
    • Re: [Amps] Here yah go, Bill, W6WRT, 2010/06/12
    • Re: [Amps] Here yah go, Roger, 2010/06/13
  • Re: [Amps] Here yah go, Roger, 2010/06/12

[Amps] GS-35b 2 meter amp - plate capacitor spacing from tube?, Bill Dzurilla, 2010/06/10

• Re: [Amps] GS-35b 2 meter amp - plate capacitor spacing from tube?, TexasRF, 2010/06/10
  • Re: [Amps] GS-35b 2 meter amp - plate capacitor spacing from tube?, Thomas Hoeppe, 2010/06/10
    • Re: [Amps] GS-35b 2 meter amp - plate capacitor spacing from tube?, Bill Dzurilla, 2010/06/11

[Amps] Heat Measurement in Amps, Patrick Barthelow, 2010/06/10

• Re: [Amps] Heat Measurement in Amps, Bill, W6WRT, 2010/06/11
  • Re: [Amps] Heat Measurement in Amps, Roger, 2010/06/11
    • Re: [Amps] Heat Measurement in Amps, k7fm, 2010/06/11
    • Re: [Amps] Heat Measurement in Amps, k7fm, 2010/06/11
    • Re: [Amps] Heat Measurement in Amps, Martin Flynn, 2010/06/12
    • Re: [Amps] Heat Measurement in Amps, Gary Smith, 2010/06/12
    • Re: [Amps] Heat Measurement in Amps, Gary Smith, 2010/06/12
  • Re: [Amps] Heat Measurement in Amps, Jeff Blaine AC0C, 2010/06/12
• [Amps] Heat Measurement in Amps, Jim Thomson, 2010/06/12

[Amps] Transformer Calcs, Andre Goldschagg, 2010/06/09

• Re: [Amps] Transformer Calcs, Dr. David Kirkby, 2010/06/09
• Re: [Amps] Transformer Calcs, Bill, W6WRT, 2010/06/10
  • Re: [Amps] Transformer Calcs, Dr. David Kirkby, 2010/06/10
    • Re: [Amps] Transformer Calcs, Carl, 2010/06/10
    • Re: [Amps] Transformer Calcs, Bill, W6WRT, 2010/06/11
    • Re: [Amps] Transformer Calcs, Patrick Barthelow, 2010/06/11
    • Re: [Amps] Transformer Calcs, Bill, W6WRT, 2010/06/11
  • Re: [Amps] Transformer Calcs, Carl, 2010/06/10
• [Amps] Transformer Calcs, Jim Thomson, 2010/06/12

Re: [Amps] 1N5408 vs 1N5553, Jim Garland, 2010/06/08

• Re: [Amps] 1N5408 vs 1N5553, Carl, 2010/06/08
  • Re: [Amps] 1N5408 vs 1N5553, Roger, 2010/06/08
• Re: [Amps] 1N5408 vs 1N5553, vk3pa, 2010/06/08
• Re: [Amps] 1N5408 vs 1N5553, Colin Lamb, 2010/06/08
• [Amps] 1N5408 vs 1N5553, Jim Thomson, 2010/06/11

[Amps] HV Diode String Question, Jim Garland, 2010/06/07

• Re: [Amps] HV Diode String Question, Bill, W6WRT, 2010/06/07
  • Re: [Amps] HV Diode String Question, Carl, 2010/06/08
• Re: [Amps] HV Diode String Question, Radio WC6W, 2010/06/08

[Amps] Centurion plate current issue, Gary Smith, 2010/06/07

• Re: [Amps] Centurion plate current issue, Alek Petkovic, 2010/06/08
  • Re: [Amps] Centurion plate current issue, Bill, W6WRT, 2010/06/08
• [Amps] Centurion plate current issue, Gary Smith, 2010/06/09
  • Re: [Amps] Centurion plate current issue, Patrick Barthelow, 2010/06/09
  • Re: [Amps] Centurion plate current issue, Carl, 2010/06/09
  • Re: [Amps] Centurion plate current issue, pfizenmayer, 2010/06/09
    • Re: [Amps] Centurion plate current issue, Gary Smith, 2010/06/09
  • Re: [Amps] Centurion plate current issue, Alek Petkovic, 2010/06/09
    • Re: [Amps] Centurion plate current issue, Bill, W6WRT, 2010/06/10
    • Re: [Amps] Centurion plate current issue, Patrick Barthelow, 2010/06/10
    • [Amps] 3-500 filament meltdowns was: Re: Centurion plate current issue, Pete Smith, 2010/06/10
    • Re: [Amps] 3-500 filament meltdowns was: Re: Centurion plate current issue, Carl, 2010/06/10
• Re: [Amps] Centurion plate current issue, SECOPSYS, 2010/06/09

[Amps] Peter Dahl / Harbach SB-220 transformer, Bill VanAlstyne W5WVO, 2010/06/07

• Re: [Amps] Peter Dahl / Harbach SB-220 transformer, Carl, 2010/06/07
  • Re: [Amps] Peter Dahl / Harbach SB-220 transformer, James, 2010/06/08
    • Re: [Amps] Peter Dahl / Harbach SB-220 transformer, Pete Smith, 2010/06/09
    • Re: [Amps] Peter Dahl / Harbach SB-220 transformer, Carl, 2010/06/09
• Re: [Amps] Peter Dahl / Harbach SB-220 transformer, Gudguyham, 2010/06/07
• [Amps] Peter Dahl / Harbach SB-220 transformer, Jim Thomson, 2010/06/11
• Re: [Amps] Peter Dahl / Harbach SB-220 transformer, Gudguyham, 2010/06/11
  • Re: [Amps] Peter Dahl / Harbach SB-220 transformer, Carl, 2010/06/11
• Re: [Amps] Peter Dahl / Harbach SB-220 transformer, Gudguyham, 2010/06/11
  • Re: [Amps] Peter Dahl / Harbach SB-220 transformer, Carl, 2010/06/11
    • Re: [Amps] Peter Dahl / Harbach SB-220 transformer, Hardy Landskov, 2010/06/11
  • Re: [Amps] Peter Dahl / Harbach SB-220 transformer, Roger, 2010/06/11
• Re: [Amps] Peter Dahl / Harbach SB-220 transformer, Gudguyham, 2010/06/11
• Re: [Amps] Peter Dahl / Harbach SB-220 transformer, Gudguyham, 2010/06/11
  • Re: [Amps] Peter Dahl / Harbach SB-220 transformer, Carl, 2010/06/12
• Re: [Amps] Peter Dahl / Harbach SB-220 transformer, Gudguyham, 2010/06/11
• [Amps] Peter Dahl / Harbach SB-220 transformer, Jim Thomson, 2010/06/12
  • Re: [Amps] Peter Dahl / Harbach SB-220 transformer, James Colville, 2010/06/12
• Re: [Amps] Peter Dahl / Harbach SB-220 transformer, Gudguyham, 2010/06/12
• Re: [Amps] Peter Dahl / Harbach SB-220 transformer, Rob Atkinson, 2010/06/12
• [Amps] Peter Dahl / Harbach SB-220 transformer, Jim Thomson, 2010/06/13
  • Re: [Amps] Peter Dahl / Harbach SB-220 transformer, Carl, 2010/06/13

[Amps] New Handy Amp, Tack Kumagai, 2010/06/07

• Re: [Amps] New Handy Amp, Hsu, 2010/06/07
  • Re: [Amps] New Handy Amp, Alex K2BB, 2010/06/07
    • Re: [Amps] New Handy Amp, Carl, 2010/06/07
  • Re: [Amps] New Handy Amp, Henk Remijn PA5KT, 2010/06/07
    • Re: [Amps] New Handy Amp, Hsu, 2010/06/07
    • Re: [Amps] New Handy Amp, Hsu, 2010/06/07
• Re: [Amps] New Handy Amp, MIKE DURKIN, 2010/06/07
  • Re: [Amps] New Handy Amp, aborg, 2010/06/07
    • Re: [Amps] New Handy Amp, Gary Hinson, 2010/06/07
    • Re: [Amps] New Handy Amp, Roger, 2010/06/08

[Amps] T/R Relays ?, Ed Stallman, 2010/06/05

• Re: [Amps] T/R Relays ?, Jim Forsyth, 2010/06/05
  • Re: [Amps] T/R Relays ?, Jeff Blaine AC0C, 2010/06/05
    • Re: [Amps] T/R Relays ?, Ed Stallman, 2010/06/06
    • Re: [Amps] T/R Relays ?, Joe Subich, W4TV, 2010/06/06
• Re: [Amps] T/R Relays ?, Rob Atkinson, 2010/06/06
  • Re: [Amps] T/R Relays ?, Roger, 2010/06/06

[Amps] HV dropping, Charles Hedrick, 2010/06/03

• Re: [Amps] HV dropping, Dave Weiss, 2010/06/03
• Re: [Amps] HV dropping, Carl, 2010/06/03
  • Re: [Amps] HV dropping, Pete Smith, 2010/06/04
• Re: [Amps] HV dropping, TexasRF, 2010/06/03

[Amps] FW: Bridging 120v loads across HV primary windings, Ron McCurdy, 2010/06/03

• Re: [Amps] FW: Bridging 120v loads across HV primary windings, Joe Subich, W4TV, 2010/06/03
• Re: [Amps] FW: Bridging 120v loads across HV primary windings, Bill, W6WRT, 2010/06/03
  • Re: [Amps] FW: Bridging 120v loads across HV primary windings, Jim Brown, 2010/06/04
• Re: [Amps] FW: Bridging 120v loads across HV primary windings, Gudguyham, 2010/06/04
• Re: [Amps] FW: Bridging 120v loads across HV primary windings, Jim Brown, 2010/06/05
  • Re: [Amps] FW: Bridging 120v loads across HV primary windings, Carl, 2010/06/06

[Amps] low power problem in linear 500w 160m, tzikas tzik, 2010/06/02

• [Amps] low power problem in linear 500w 160m, tzikas tzik, 2010/06/02
• [Amps] low power problem in linear 500w 160m, tzikas tzik, 2010/06/03

[Amps] alden 8101 hv connector's., Jim Thomson, 2010/06/01

• Re: [Amps] alden 8101 hv connector's., Bill, W6WRT, 2010/06/01
  • Re: [Amps] alden 8101 hv connector's., Carl, 2010/06/02

Re: [Amps] Alpha 77DX, Charlie Young, 2010/06/01

• [Amps] Alpha 77DX, Jim Thomson, 2010/06/01

Re: [Amps] Bridging 120v loads across HV primary windings, Martin Flynn, 2010/06/01

• Re: [Amps] Bridging 120v loads across HV primary windings, Jim Brown, 2010/06/02
• Re: [Amps] Bridging 120v loads across HV primary windings, Carl, 2010/06/01
• Re: [Amps] Bridging 120v loads across HV primary windings, James Colville, 2010/06/01
  • Re: [Amps] Bridging 120v loads across HV primary windings, Jim Brown, 2010/06/02
    • Re: [Amps] Bridging 120v loads across HV primary windings, Carl, 2010/06/03
• Re: [Amps] Bridging 120v loads across HV primary windings, Bill, W6WRT, 2010/06/01
  • Re: [Amps] Bridging 120v loads across HV primary windings, Vic K2VCO, 2010/06/01
• Re: [Amps] Bridging 120v loads across HV primary windings, Jim Brown, 2010/06/01
• [Amps] Bridging 120v loads across HV primary windings, Jim Thomson, 2010/06/01
• Re: [Amps] Bridging 120v loads across HV primary windings, Paul Decker, 2010/06/02
  • Re: [Amps] Bridging 120v loads across HV primary windings, Jim Brown, 2010/06/03
  • Re: [Amps] Bridging 120v loads across HV primary windings, James Colville, 2010/06/03
• Re: [Amps] Bridging 120v loads across HV primary windings, Gudguyham, 2010/06/04
• [Amps] Bridging 120v loads across HV primary windings, Jim Thomson, 2010/06/04

[Amps] backwards plate transformer, Martin Flynn, 2010/06/01

• Re: [Amps] backwards plate transformer, Dave Hachadorian, 2010/06/01
  • Re: [Amps] backwards plate transformer, Lee Buller, 2010/06/01
  • Re: [Amps] backwards plate transformer, Roger, 2010/06/02
• Re: [Amps] backwards plate transformer, jimsmitheguard-a, 2010/06/01
• Re: [Amps] backwards plate transformer, Chuck Curran, 2010/06/05
  • Re: [Amps] backwards plate transformer, Bill, W6WRT, 2010/06/06
  • Re: [Amps] backwards plate transformer, Will Peters, 2010/06/07
• [Amps] backwards plate transformer, Jim Thomson, 2010/06/11
  • Re: [Amps] backwards plate transformer, Roger, 2010/06/11
    • Re: [Amps] backwards plate transformer, Ron Youvan, 2010/06/11
    • Re: [Amps] backwards plate transformer, Carl, 2010/06/11

Re: [Amps] Fermi Lab HV solutions, Fuqua, Bill L, 2010/06/01

• Re: [Amps] Fermi Lab HV solutions, Bill, W6WRT, 2010/06/01
  • Re: [Amps] Fermi Lab HV solutions, Carl, 2010/06/02