Jim,
I think he means the semi-break in hang time at the end.
But his sequence sounds ok to me. 30 ms up front should allow for even the
most slow relay cycling and setting times.
73/jeff/ac0c
--------------------------------------------------
From: "Jim Forsyth" <mail@jimforsyth.com>
Sent: Sunday, June 06, 2010 2:25 PM
To: <amps@contesting.com>
Subject: Re: [Amps] T/R Relays ?
> If the radio is not going to transmit for 300ms then why do you need the
> sequencer?
>
> Jim, AF6O
>
> --------------------------------------------------
> From: "Ed Stallman" <n5dg@airmail.net>
> Sent: Saturday, June 05, 2010 11:39 AM
> To: <amps@contesting.com>
> Subject: [Amps] T/R Relays ?
>
>> my 6m amp GS35b T/R relays are Tohlsu CX600 . I would like to us
>> breakin and do away with the PTT I'm using now, I have a sequencer
>> that will key the Amp 30 (MS) before the radio... Radio delay set to
>> 300 (MS) to do away with relay chatter . Also have a buffer relay to
>> go between radio and sequencer .
>>
>> My Setup will be
>>
>> Radio keying the Buffer relay
>> Buffer relay keying Sequencer
>> Sequencer keying Amp first , then 30 (MS) later keys radio
>> Radio breaken set to 300 (MS)
>>
>> Am I safe with this setup ? don't want to arc relay contacts
>>
>> Thanks Ed N5DG
>>
>> _______________________________________________
>> Amps mailing list
>> Amps@contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>>
>>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|