I have to agree with Carl as to the price. $45.00 ea or 2 for $85.00! If you
have a situation that you are damaging the seal due to poor cooling, they could
be worth the price. Otherwise the usual $5.00 units will be on my tubes.
Randy AB9GO
"In theory, theory and practice are the same thing. In practice they're not."
-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
Behalf Of Carl
Sent: Thursday, July 01, 2010 9:02 AM
To: Jim Garland; amps@contesting.com
Subject: Re: [Amps] New High Efficiency 3-500Z plate caps
Talk about pricey!
How do those perform when using transverse cooling? Due to the large surface
area Id think that the graphite anodes would benefit the most.
Carl
KM1H
----- Original Message -----
From: "Jim Garland" <4cx250b@muohio.edu>
To: <amps@contesting.com>
Sent: Thursday, July 01, 2010 8:25 AM
Subject: [Amps] New High Efficiency 3-500Z plate caps
> Check out http://www.youtube.com/watch?v=EoVCGFPvOuk
> <http://www.youtube.com/watch?v=EoVCGFPvOuk&hd=1> &hd=1 for a neat video
> showcasing the new 3-500Z plate caps by Mike Freeman NT8O and his brother
> at
> www.73CNC.com <http://www.73cnc.com/>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
Confidentiality Notice: This e-mail message, including any attachments, is for
the sole use of the intended recipient(s) and may contain confidential and
privileged information. Any unauthorized review, use, disclosure or
distribution is prohibited. If you are not the intended recipient, please
contact the sender by reply e-mail and destroy all copies of the original
message.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|