On 7/1/2010 7:52 AM, Pete Smith wrote:
> Somewhere in my youth, I recall reading that plate caps like that make
> very little difference, because the ability of that thin plate electrode
> to transfer heat from the plate itself is the limiting factor, not the
> size or surface area of the cap. True/false?
I believe that the major portion of the heat dissipated by the plate is
radiated rather
than conducted to the plate cap. The job of the cap is primarily to keep the
seal area cool.
--
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco/
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|