He should offer classes on tube and jig making. The guy is talented!
Randy AB9GO
-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
Behalf Of Bill, W6WRT
Sent: Tuesday, August 31, 2010 1:37 PM
To: amps@contesting.com
Subject: Re: [Amps] Tubes, made in the USA, in the olden days; Films?
ORIGINAL MESSAGE:
On Mon, 30 Aug 2010 17:32:50 -0400, "Mike McCarthy, W1NR"
<lists@w1nr.net> wrote:
>Rolling your own vacuum tubes:
>
>http://videosift.com/video/How-to-Make-Your-Own-Vacuum-Tubes
>
>Mike, W1NR
REPLY:
Don't know which is more impressive - making the tube or making the
machinery for making the tube. Quite a video, either way. Thanks.
73, Bill W6WRT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
Confidentiality Notice: This e-mail message, including any attachments, is for
the sole use of the intended recipient(s) and may contain confidential and
privileged information. Any unauthorized review, use, disclosure or
distribution is prohibited. If you are not the intended recipient, please
contact the sender by reply e-mail and destroy all copies of the original
message.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|