Hi
The power supply portion sounds good.
Your selection of device is good and there is a lot on the net about them.
A couple of SD2932 can be used as push pull single unit provided that you
strap each device drains together and separate gates fed and on each one a
small series resistor about 2.7Ohm/1W in series. then strapped together.
2devices will peak at 850W at 50V.
Cooling the pallet is a mechanical homework but once done you have a great
base.
I have been building these for a year now with great success, some of them
are offered on eBay under my call sign 4z4rb
I will be happy to answer all your questions!
73's and Shalom from Israel.
Baruch Zilbershatz
Nitzanay-Oz 118
Nitzanay -Oz
42836
ISRAEL
phone: (+)972-052 8753838
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|