Could you send me that German guy's detail?
73!Hsu
----- Original Message -----
From: "Baruch Zilbershatz" <4z4rb@bezeqint.net>
To: "'Hsu'" <hsu4qro@gmail.com>
Cc: <amps@contesting.com>
Sent: Saturday, October 16, 2010 6:36 AM
Subject: RE: [Amps] New 2 PA design
> Never seen an app. Note for it.
> That German guy had it running great although He managed to blow one fet
> during setup.
> He had it framed on his shack wall!
>
> Baruch Zilbershatz
> Nitzanay-Oz 118
> Nitzanay -Oz
> 42836
> ISRAEL
> phone: (+)972-052 8753838
>
>
> -----Original Message-----
> From: Hsu [mailto:hsu4qro@gmail.com]
> Sent: Saturday, October 16, 2010 12:27 AM
> To: Baruch Zilbershatz
> Cc: amps@contesting.com
> Subject: Re: [Amps] New 2 PA design
>
> http://www.microsemi.com/micnotes/APT9502.pdf and
> http://www.microsemi.com/micnotes/APT9701.pdf
> ----- Original Message -----
> From: "Hsu" <hsu4qro@gmail.com>
> To: "Baruch Zilbershatz" <4z4rb@bezeqint.net>
> Cc: <amps@contesting.com>
> Sent: Saturday, October 16, 2010 6:21 AM
> Subject: Re: [Amps] New 2 PA design
>
>
>>I remnember that APT(now microsemi) have an AN, it is transformerless
> design, Class C ,1kW output.
>> ----- Original Message -----
>> From: "Hsu" <hsu4qro@gmail.com>
>> To: "Baruch Zilbershatz" <4z4rb@bezeqint.net>
>> Cc: <amps@contesting.com>
>> Sent: Saturday, October 16, 2010 6:19 AM
>> Subject: Re: [Amps] New 2 PA design
>>
>>
>>> If use ARF1510/11 worked in SEPP or ARF1505 in P-P configattion,
> transformerless are possible, only needs a PFC unit.My teacher in the
> university, built a PFC unit what the out put volt below the input's.
>>> 73!Hsu
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|