Never seen an app. Note for it.
That German guy had it running great although He managed to blow one fet
during setup.
He had it framed on his shack wall!
Baruch Zilbershatz
Nitzanay-Oz 118
Nitzanay -Oz
42836
ISRAEL
phone: (+)972-052 8753838
-----Original Message-----
From: Hsu [mailto:hsu4qro@gmail.com]
Sent: Saturday, October 16, 2010 12:27 AM
To: Baruch Zilbershatz
Cc: amps@contesting.com
Subject: Re: [Amps] New 2 PA design
http://www.microsemi.com/micnotes/APT9502.pdf and
http://www.microsemi.com/micnotes/APT9701.pdf
----- Original Message -----
From: "Hsu" <hsu4qro@gmail.com>
To: "Baruch Zilbershatz" <4z4rb@bezeqint.net>
Cc: <amps@contesting.com>
Sent: Saturday, October 16, 2010 6:21 AM
Subject: Re: [Amps] New 2 PA design
>I remnember that APT(now microsemi) have an AN, it is transformerless
design, Class C ,1kW output.
> ----- Original Message -----
> From: "Hsu" <hsu4qro@gmail.com>
> To: "Baruch Zilbershatz" <4z4rb@bezeqint.net>
> Cc: <amps@contesting.com>
> Sent: Saturday, October 16, 2010 6:19 AM
> Subject: Re: [Amps] New 2 PA design
>
>
>> If use ARF1510/11 worked in SEPP or ARF1505 in P-P configattion,
transformerless are possible, only needs a PFC unit.My teacher in the
university, built a PFC unit what the out put volt below the input's.
>> 73!Hsu
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|