Amps
[Top] [All Lists]

Re: [Amps] variable capacitors

To: "'Dave M'" <slash_dot@msn.com>
Subject: Re: [Amps] variable capacitors
From: "Mike Clarson" <mclarson@rcc.com>
Reply-to: mclarson@rcc.com
Date: Tue, 25 Jan 2011 16:18:54 -0500
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Just make sure you do not ground the rotor or frame, and use an insulated
shaft coupling. 

 

  _____  

From: Dave M [mailto:slash_dot@msn.com] 
Sent: Tuesday, January 25, 2011 4:01 PM
To: mclarson@rcc.com; kg7hf@comcast.net
Cc: amps@contesting.com
Subject: RE: [Amps] variable capacitors

 

Actually I have never thought of that , I had considered using just half of
one , but taking the capacitance across the 2 stators should also drop the
min capacitance as well , ....important at 10m in an HF amp ,

............................................................................
..........................

 

73     VE3DV , Dave




  


> From: mclarson@rcc.com
> To: kg7hf@comcast.net
> Date: Tue, 25 Jan 2011 14:03:35 -0500
> CC: amps@contesting.com
> Subject: Re: [Amps] variable capacitors
> 
> Butterflies are not that bad -- if you do not ground the rotor and use the
> two stators as the two ends of the cap, you have half the min capacitance
> (important at VHF) twice the breakdown voltage, and no poor rotor contact
> issues. --Mike, WV2ZOW
> 
> -----Original Message-----
> From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
> Behalf Of Paul Decker
> Sent: Tuesday, January 25, 2011 1:48 PM
> To: Dave M
> Cc: amps@contesting.com
> Subject: Re: [Amps] variable capacitors
> 
> 
> 
> Thanks Dave, much appreciated, I'll drop him a line. 
> 
> 
> 
> 
> 
> 
> 
> 
> ----- Original Message ----- 
> From: "Dave M" <slash_dot@msn.com> 
> To: kg7hf@comcast.net, amps@contesting.com 
> Sent: Tuesday, January 25, 2011 12:53:09 PM 
> Subject: RE: [Amps] variable capacitors 
> 
> Paul , I just called Bob at Monarch scince his website is down , he says
you
> can contact him directly by email and he is sure he can help you out he
has
> the facilities to make pretty much what ever you need , I have been asking
> for about a yr if he has moved to ordinary air variables but he thinks
there
> wouldnt be much call for them , if a few of us ask he will start producing
> something a little less expensive than what is available from the
mainstream
> scources but until then he has a fair offering of butterflies 
>   
> 
> Leschyna@gmail.com is his email address 
>   
>   
>   
> 
>
............................................................................
> .......................... 
> 
> 73     VE3DV , Dave 
> 
> 
> 
>   
> > Date: Tue, 25 Jan 2011 15:10:24 +0000 
> > From: kg7hf@comcast.net 
> > To: amps@contesting.com 
> > Subject: Re: [Amps] variable capacitors 
> > 
> > 
> > 
> > 
> > 
> > WOW, way more than I budgeted for this project. 
> > 
> > 
> > 
> > 160-205-1 
> > 
> > Qty:       1 to 24 units, $68.63 each plus a $250.00 setup charge 
> > 
> > Qty:       25 to 99 units, $68.63 each no setup charge required 
> > 
> > Qty:       100 units and above, $67.26 each 
> > 
> > 
> > 
> > 160-208-1 
> > 
> > Qty:       1 to 24 units, $70.56 each plus a $250.00 setup charge 
> > 
> > Qty:       25 to 99 units, $70.56 each no setup charge required 
> > 
> > Qty:       100 units and above, $69.15 each 
> > 
> > 
> > 
> > Delivery:              6 weeks or sooner 
> > 
> > FOB:                      Lindenhurst, New York 
> > 
> > Terms:                  Visa, MasterCard, American Express, and wire
> transfer accepted (add $24.00 wire transfer fee to order) 
> > 
> > 
> > 
> > 
> > 
> > David C. Kjeldsen 
> > 
> > Viking Technologies 
> > 
> > (formerly Cardwell Condenser Corporation) 
> > 
> > A member of the Viking Solutions Group, Ltd. 
> > 
> > 80 East Montauk Highway 
> > 
> > Lindenhurst, New York 11757 
> > 
> > Telephone: 631-957-8000 
> > 
> > Facsimile: 631-957-7203 
> > 
> > www.cardwellcondenser.com 
> > 
> > 
> > 
> > 
> > 
> > 
> > ----- Original Message ----- 
> > From: "Paul Decker" <kg7hf@comcast.net> 
> > To: amps@contesting.com 
> > Sent: Monday, January 24, 2011 11:47:55 PM 
> > Subject: variable capacitors 
> > 
> > 
> > 
> > 
> > Hi gang, 
> > 
> > 
> > 
> > I'm trying to track down some possible substitutes for some cardwell. 
> > 
> > 
> > 
> > I need something along the lines of the 160-205 and 160-208 caps. 
> > 
> > http://www.cardwellcondenser.com/PAGES/jcsp02.html 
> > 
> > 
> > 
> > Any ideas on sources or substitutes? 
> > 
> > 
> > 
> > Thanks & 73, 
> > 
> > Paul, kg7hf 
> > _______________________________________________ 
> > Amps mailing list 
> > Amps@contesting.com 
> > http://lists.contesting.com/mailman/listinfo/amps 
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
> 
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>