Amps
[Top] [All Lists]

Re: [Amps] doorknob cap suppliers ?

To: dezrat1242@yahoo.com
Subject: Re: [Amps] doorknob cap suppliers ?
From: Robert Harmon <k6uj@pacbell.net>
Date: Tue, 15 Mar 2011 11:47:07 -0700
List-post: <amps@contesting.com">mailto:amps@contesting.com>
I see your point.  I'll see if I can find higher voltage caps
that will fit O.K.
I have been looking at the Russian caps on ebay,
good prices.

thanks Bill,

Bob
K6UJ




On Mar 14, 2011, at 10:51 AM, Bill, W6WRT wrote:

> ORIGINAL MESSAGE:
> 
> On Sun, 13 Mar 2011 12:00:53 -0700, Robert Harmon <k6uj@pacbell.net>
> wrote:
> 
>> Yes that is what is in there, two 2000pf 6kv discs in parallel.
>> I'm going through and upgrading caps in the amp,
> 
> REPLY:
> 
> For what it's worth - IMO, 6kV is a little bit marginal. If you ever
> have an antenna fault while transmitting (broken wire, shorted coax,
> whatever) the voltage across the cap can easily exceed 6kV. As long as
> you're upgrading, why not put in a 12 or 15 kV cap? The cost is only a
> little more and the peace of mind is priceless.
> 
> I recommend the Russian doorknobs on eBay. Good stuff. 
> 
> 73, Bill W6WRT
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>