[Amps] Pictures of new hi-pot tester posted (high voltage breakdown test

To:	amps@contesting.com
Subject:	[Amps] Pictures of new hi-pot tester posted (high voltage breakdown tester).
From:	LB3HC <rezycle.bin@gmail.com>
Date:	Sun, 17 Apr 2011 10:19:05 +0200
List-post:	<amps@contesting.com">mailto:amps@contesting.com>

I have posted some pictures of my new HI-POT tester at this link:
http://www.lb3hc.net/hipot . Take a look if you are interested.

Spec:

Output range: 0-12KV DC.
Output 1: metered 0-100uA@12KV
Output 2: unmetered 0,05A@12KV hig current output for removing
whiskers etc in vacuum capacitors
Transformer: eBay neon sign trafo 700 KVA, center tapped. Isolated from chassis
Voltage control: Variac controlled
Insulation: nylon isolated 10mm outside chassis
DUT test plate: isolated 10mm nylon

73
LB3HC
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread]	Current Thread	[Next in Thread>
[Amps] Pictures of new hi-pot tester posted (high voltage breakdown tester)., LB3HC <=

Previous by Date:	Re: [Amps] ACOM1010 info, AB2E Darrell
Next by Date:	Re: [Amps] Sockets, air, options, Alek Petkovic
Previous by Thread:	[Amps] Pictures of new HI-POT tester (high voltage breakdown tester) posted, LB3HC
Next by Thread:	[Amps] TL-922A HV Transformer, Steve London
Indexes:	[Date] [Thread] [Top] [All Lists]