----- Original Message -----
From: "Rob Atkinson" <ranchorobbo@gmail.com>
To: <amps@contesting.com>
Sent: Wednesday, February 15, 2012 4:32 PM
Subject: Re: [Amps] Source for plate xfrmer
Yes it's shorted. It's one of those Maxwell energy discharge caps
which means it has to be derated to 6 KV for WVDC. I bought it on
eBay in a Gov't auction. I know from a friend's experience that
insane amounts of filter capacitance like that can't be brought up
with a single step start unless you want melted relays. It has to be
ramped up slowly over a 30 to 60 second period. I have to not only
work out a good bleeder system but also a way to tell whether or not
the bleeders in service are functioning and have redundancy. IF I
actually use it.
Dave, what would YOU do with it? : )
73
He could level an annoying section of Londonstan (-;
Carl
KM1H
On Wed, Feb 15, 2012 at 11:21 AM, Mike Andrews <mikea@mikea.ath.cx> wrote:
> On Wed, Feb 15, 2012 at 05:01:22PM -0000, DAVE WHITE wrote:
>> I can just picture the crater where St Charles, IL used to be if you
>> discharged that beast! Where on earth did it come from? If you weren't so
>> far away I'd be asking you if it was for sale....
>>
>> Dave G0OIL
>>
>> ----- Original Message -----
>> From: "Rob Atkinson" <ranchorobbo@gmail.com>
>> To: "Carl" <km1h@jeremy.mv.com>
>> Cc: <amps@contesting.com>
>> Sent: Wednesday, February 15, 2012 4:19 PM
>> Subject: Re: [Amps] Source for plate xfrmer
>>
>>
>> >I have a 10 KV 200 uF oil cap weighs 175 lbs and that's why I'm
>> > hesitant to use it.
>
> Hmmmmm ... .5 * C * V * V
> .5 * .0002 * 10^4 * 10^4
> 10^-4 * 10^4 * 10^4
> 10^4 Joules.
>
> That's ... hefty.
>
> You do keep it shorted when not in circuit, *YES*?
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1424 / Virus Database: 2112/4811 - Release Date: 02/15/12
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|