The common Bosch-style 12volt 30 amp automotive relay has been used to a bit of
success. They are available most everywhere.
73, AB3HT
--- On Fri, 3/9/12, Pete Smith N4ZR <n4zr@contesting.com> wrote:
From: Pete Smith N4ZR <n4zr@contesting.com>
Subject: Re: [Amps] Relay suggestions please
To: amps@contesting.com
Date: Friday, March 9, 2012, 5:07 AM
Steve, you might want to take a look at the PCB relays used by Inrad in
their antenna switches. IIRC, they have been tested to 1.5 KW
continuous, 30 MHz and at 3:1 load SWR, and the last time I bought some
they were $2 each. Amazing. W2VJN did the design and test.
73, Pete N4ZR
The World Contest Station Database, updated daily at www.conteststations.com
The Reverse Beacon Network at http://reversebeacon.net, blog at
reversebeacon.blogspot.com,
spots at telnet.reversebeacon.net, port 7000 and
arcluster.reversebeacon.net, port 7000
On 3/9/2012 3:38 AM, Steve Thompson wrote:
> I'm looking at a lower cost alternative to a switching system that
> currently uses coaxial relays. Frequencies up to 30MHz, powers in
> the region of 1kW and continuous carrier has to be catered for,
> but no hot switching.
>
> Any suggestions for open frame or pcb types with a track record in
> amplifier products?
>
> Thanks, Steve
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|