Inrad?
Take a look at the relays that Jim W8ZR uses in his station and antenna
switches. They work well and are very inexpensive.
73
Jim W7RY
--------------------------------------------------
From: "Pete Smith N4ZR" <n4zr@contesting.com>
Sent: Friday, March 09, 2012 2:07 AM
To: <amps@contesting.com>
Subject: Re: [Amps] Relay suggestions please
> Steve, you might want to take a look at the PCB relays used by Inrad in
> their antenna switches. IIRC, they have been tested to 1.5 KW
> continuous, 30 MHz and at 3:1 load SWR, and the last time I bought some
> they were $2 each. Amazing. W2VJN did the design and test.
>
> 73, Pete N4ZR
> The World Contest Station Database, updated daily at
> www.conteststations.com
> The Reverse Beacon Network at http://reversebeacon.net, blog at
> reversebeacon.blogspot.com,
> spots at telnet.reversebeacon.net, port 7000 and
> arcluster.reversebeacon.net, port 7000
>
>
> On 3/9/2012 3:38 AM, Steve Thompson wrote:
>> I'm looking at a lower cost alternative to a switching system that
>> currently uses coaxial relays. Frequencies up to 30MHz, powers in
>> the region of 1kW and continuous carrier has to be catered for,
>> but no hot switching.
>>
>> Any suggestions for open frame or pcb types with a track record in
>> amplifier products?
>>
>> Thanks, Steve
>> _______________________________________________
>> Amps mailing list
>> Amps@contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>>
>>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|