To: | amps@contesting.com |
---|---|
Subject: | Re: [Amps] every db lost re Tubes vs. Solid State |
From: | Jim Brown <jim@audiosystemsgroup.com> |
Reply-to: | jim@audiosystemsgroup.com |
Date: | Mon, 30 Apr 2012 16:13:14 -0700 |
List-post: | <amps@contesting.com">mailto:amps@contesting.com> |
On 4/30/2012 1:55 PM, Mike Waters wrote: > Nobody's coax connectors, properly installed, get hot. Correction -- JUNK connectors can get hot with 1,5kW. Example are the JUNK elbows and Tees that use a tiny spring as the center conductor. I've also had the JUNK Tees fall apart. 73, Jim K9YC _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: [Amps] every db lost re Tubes vs. Solid State, Mike Waters |
---|---|
Next by Date: | Re: [Amps] every db lost re Tubes vs. Solid State, Jim Brown |
Previous by Thread: | Re: [Amps] every db lost re Tubes vs. Solid State, Mike Waters |
Next by Thread: | Re: [Amps] every db lost re Tubes vs. Solid State, Larry Benko |
Indexes: | [Date] [Thread] [Top] [All Lists] |