RG-142 if you want the shielding braid and long term reliability but be
careful of cold flow and use wide radius bends; I limit RG-58/59 to 2500VDC.
Carl
KM1H
----- Original Message -----
From: "Jim Barber" <audioguy@q.com>
To: <Amps@contesting.com>
Sent: Saturday, June 23, 2012 6:39 PM
Subject: [Amps] Coax for MHV connectors?
>I need to make up some MHV cables for a 4KV 2A max DC supply, (both B+
> and B-) and I made the mistake of looking up the voltage ratings for
> RG-58, RG-59 and LMR-240 cables, all commonly used with those connectors:
>
> RG-58 1900V
> RG-59 2300V
> LMR-240 1500V
>
> In a word, yikes! RG-59 has the highest rating, but I like it the least
> for exposed cables because of the solid center conductor
>
> The connectors are rated at 5KVDC, but what cable type? It seems like
> every time I think I know something... ?
>
> I'm tempted to give it up and machine my own bulkhead pass-throughs out
> of acrylic and use HV cable instead. In fact I would have already except
> I'd really like the cables to be detachable.
>
> Comments?
>
> Thanks,
> Jim N7CXI
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1424 / Virus Database: 2433/5089 - Release Date: 06/23/12
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|