[Amps] Fw: SB200 on 6M

["Karel Ebenstreit" <kebenstr@bmts.com>]

sorry forgot to cc.
Karel, VA3KO

----- Original Message ----- 
From: "Karel Ebenstreit" <kebenstr@bmts.com>
To: "Louis Parascondola" <gudguyham@aol.com>
Sent: Monday, June 03, 2013 7:05 PM
Subject: Re: [Amps] SB200 on 6M


> Why do not  you use famous Richard Measure, he designs and sell 
> suppressors for all makes.
> I am not sure if he is still around, I used him for my 4-1000A's and 
> 3-500's. some time ago.
> Karel , VA3KO
>
> ----- Original Message ----- 
> From: "Louis Parascondola" <gudguyham@aol.com>
> To: <km1h@jeremy.mv.com>; <jim.thom@telus.net>; <amps@contesting.com>
> Sent: Monday, June 03, 2013 6:57 PM
> Subject: Re: [Amps] SB200 on 6M
>
>
> > Knowing the right suppressor to use on an SB-200 conversion is what makes 
> > the bucks.
> >
> > Having to use a high wattage resistor on such a small tube as a 572B 
> > means
> > you havent a clue about suppressor design, and simply use a generic brute
> > force method.
> >
> > Carl
> > KM1H
> >
> >
> >
> >
> >
> > -----Original Message-----
> > From: Carl <km1h@jeremy.mv.com>
> > To: Jim Thomson <jim.thom@telus.net>; amps <amps@contesting.com>
> > Sent: Mon, Jun 3, 2013 5:56 pm
> > Subject: Re: [Amps] SB200 on 6M
> >
> >
> > > I'm converting a SB200 for 6M. What's the best configuration for the
> > > Anti-Parasitic Choke?
> > >
> > > Thanks
> > >
> > > - Paul
> > >
> > >
> > > ##  dunno.  BUT if the 2 watt carbon comp resistors heat up,  use more 
> > > of
> > > em in parallel,
> > > OR  use a small 7-10-15 watt  GLOBAR.    You can still buy the small
> > > globars  with wire leads
> > > out each end..still on their website.    Dunno what the min order is
> > > though.
> > >
> > > ##  On several 4-1000  HF amps from years ago, we would use five  of 
> > > those
> > > carbon comp resistors
> > > in parallel...end of heating problems.
> > >
> > > Jim  VE7RF
> >
> > Having to use a high wattage resistor on such a small tube as a 572B 
> > means
> > you havent a clue about suppressor design, and simply use a generic brute
> > force method.
> >
> > Carl
> > KM1H
> >
> > _______________________________________________
> > Amps mailing list
> > Amps@contesting.com
> > http://lists.contesting.com/mailman/listinfo/amps
> >
> >
> > _______________________________________________
> > Amps mailing list
> > Amps@contesting.com
> > http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps