Thanks Carl,
can you tell me more, what is wrong with his methods (I know he gets too
religious, but knows his technical stuff too). I talked with him some 10
years ago, he might have changed a bit by now.
I did not understand what you meant by "use the generic brute force method".
Karel
VA3KO
----- Original Message -----
From: "Carl" <km1h@jeremy.mv.com>
To: "Karel Ebenstreit" <kebenstr@bmts.com>; <jim.thom@telus.net>;
<amps@contesting.com>
Sent: Monday, June 03, 2013 9:34 PM
Subject: Re: [Amps] SB200 on 6M
More like infamous. That is the voodoo crap I mentioned earlier.
Carl
KM1H
Subject: Fw: [Amps] SB200 on 6M
sorry forgot to cc.
Karel, VA3KO
----- Original Message -----
From: "Karel Ebenstreit" <kebenstr@bmts.com>
To: "Louis Parascondola" <gudguyham@aol.com>
Sent: Monday, June 03, 2013 7:05 PM
Subject: Re: [Amps] SB200 on 6M
Why do not you use famous Richard Measure, he designs and sell
suppressors for all makes.
I am not sure if he is still around, I used him for my 4-1000A's and
3-500's. some time ago.
Karel , VA3KO
----- Original Message -----
From: "Louis Parascondola" <gudguyham@aol.com>
To: <km1h@jeremy.mv.com>; <jim.thom@telus.net>; <amps@contesting.com>
Sent: Monday, June 03, 2013 6:57 PM
Subject: Re: [Amps] SB200 on 6M
Knowing the right suppressor to use on an SB-200 conversion is what
makes the bucks.
Having to use a high wattage resistor on such a small tube as a 572B
means
you havent a clue about suppressor design, and simply use a generic
brute
force method.
Carl
KM1H
-----Original Message-----
From: Carl <km1h@jeremy.mv.com>
To: Jim Thomson <jim.thom@telus.net>; amps <amps@contesting.com>
Sent: Mon, Jun 3, 2013 5:56 pm
Subject: Re: [Amps] SB200 on 6M
I'm converting a SB200 for 6M. What's the best configuration for the
Anti-Parasitic Choke?
Thanks
- Paul
## dunno. BUT if the 2 watt carbon comp resistors heat up, use more
of
em in parallel,
OR use a small 7-10-15 watt GLOBAR. You can still buy the small
globars with wire leads
out each end..still on their website. Dunno what the min order is
though.
## On several 4-1000 HF amps from years ago, we would use five of
those
carbon comp resistors
in parallel...end of heating problems.
Jim VE7RF
Having to use a high wattage resistor on such a small tube as a 572B
means
you havent a clue about suppressor design, and simply use a generic
brute
force method.
Carl
KM1H
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1432 / Virus Database: 3184/5880 - Release Date: 06/03/13
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|