You should have reduced the L across the resistors!
73
Peter
-----Original Message-----
From: Amps [mailto:amps-bounces@contesting.com] On Behalf Of Jim Thomson
Sent: Montag, 3. Juni 2013 18:47
To: amps@contesting.com
Subject: [Amps] SB200 on 6M
Date: Sun, 02 Jun 2013 16:16:36 -0700
From: Paul Baldock <paul@paulbaldock.com>
To: Amps <amps@contesting.com>
Subject: [Amps] SB200 on 6M
I'm converting a SB200 for 6M. What's the best configuration for the
Anti-Parasitic Choke?
Thanks
- Paul
## dunno. BUT if the 2 watt carbon comp resistors heat up, use more of em
in parallel,
OR use a small 7-10-15 watt GLOBAR. You can still buy the small globars
with wire leads
out each end..still on their website. Dunno what the min order is though.
## On several 4-1000 HF amps from years ago, we would use five of those
carbon comp resistors in parallel...end of heating problems.
Jim VE7RF
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|