Amps
[Top] [All Lists]

[Amps] Henry transformer

To: amps@contesting.com
Subject: [Amps] Henry transformer
From: Donald Fox <taurusshoguy@yahoo.com>
Date: Mon, 29 Jul 2013 06:06:30 -0700 (PDT)
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Mike and Glen:

Henry used the ECA transformers in the 80's and 90's from what I have learned 
by working on them.
I believe you have the primary/secondary relationship reversed though.

Typcially, the primary on these is the mounted screw terminals and the 
secondaries are the large three solder lugs.
Most if not all of the Henry console type amps are choke input filtering, so 
the AC rating on these puppies is higher than it would be for a typical 
capacitive filter system.
I expect that the secondary on that thing will be 4000, 5000, or even 6000 
volts AC which is a bunch. 
An email to Ted Henry may tell you all you need to know.

Don   N8ECH
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>