Yup... and Henry Power generator manuals are known for errors and omissions in
specification.
I would suspect they up'd the plate voltage and corrected that entry, but not
the transformer part number to the ECA-1214A
or they listed the EC-1028 incorrectly.
In looking at the manual I have that covers the 1500D, 2000D, 2500D and 3000D,
the EC-1028 is listed as the transformer for all models with plate voltages
ranging from 3900 - 4200 volts... (taps?)
Time for a measurement!
73, George
K8BRW
________________________________
From: Glen Zook <gzook@yahoo.com>
To: Shagbark Acres <gbenko@prodigy.net>; Donald Fox <taurusshoguy@yahoo.com>;
"amps@contesting.com" <amps@contesting.com>
Sent: Monday, July 29, 2013 11:34 AM
Subject: Re: [Amps] Henry transformer
The Henry 2000D manual indicates a plate voltage of 4400-volts at a current of
900 mA using the EC-1028 transformer.
Glen, K9STH
Website: http://k9sth.com
________________________________
From: Shagbark Acres <gbenko@prodigy.net>
To: Shagbark Acres <gbenko@prodigy.net>; Donald Fox <taurusshoguy@yahoo.com>;
"amps@contesting.com" <amps@contesting.com>
Sent: Monday, July 29, 2013 8:21 AM
Subject: Re: [Amps] Henry transformer
1028, 1092A 3200 VDC @ 800 ma CCS
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|