----- Forwarded Message -----
From: Shagbark Acres <gbenko@prodigy.net>
To: Jim W7RY <w7ry@centurytel.net>
Sent: Monday, July 29, 2013 11:29 AM
Subject: Re: [Amps] Henry transformer
Hi Jim,
These are the rated outputs of the POWER SUPPLY that Henry use these
transformers in. This data was copied directly from the Henry site some years
ago.
So when used with a choke and the oil cap, this was the rating...
73, George
K8BRW
________________________________
From: Jim W7RY <w7ry@centurytel.net>
To: Shagbark Acres <gbenko@prodigy.net>; Donald Fox <taurusshoguy@yahoo.com>;
amps@contesting.com
Sent: Monday, July 29, 2013 9:45 AM
Subject: Re: [Amps] Henry transformer
How about 3200 volts AC... A transformer is AC not DC. Who know which type of
a filter will be used!
Can you please clarify?
73
Jim W7RY
-----Original Message----- From: Shagbark Acres
Sent: Monday, July 29, 2013 6:21 AM
To: Shagbark Acres ; Donald Fox ; amps@contesting.com
Subject: Re: [Amps] Henry transformer
1028, 1092A 3200 VDC @ 800 ma CCS
________________________________
From: Shagbark Acres <gbenko@prodigy.net>
To: Donald Fox <taurusshoguy@yahoo.com>; "amps@contesting.com"
<amps@contesting.com>
Sent: Monday, July 29, 2013 9:19 AM
Subject: Re: [Amps] Henry transformer
Transformers used in Henry Amplifiers
1171A, 3900 VDC @ 800 MA CCS (as used in 3KA, 2K Classic X, 3K Classic X, amps
with 8877or two 3-500
1214A, 4400 VDC @ 800 MA CCS (as used in 3K Premier, 3K ULTRA, 3K Classic X
MKII, amps with 3CX1200A7
George K8BRW
________________________________
From: Donald Fox <taurusshoguy@yahoo.com>
To: amps@contesting.com
Sent: Monday, July 29, 2013 9:06 AM
Subject: [Amps] Henry transformer
Mike and Glen:
Henry used the ECA transformers in the 80's and 90's from what I have learned
by working on them.
I believe you have the primary/secondary relationship reversed though.
Typcially, the primary on these is the mounted screw terminals and the
secondaries are the large three solder lugs.
Most if not all of the Henry console type amps are choke input filtering, so
the AC rating on these puppies is higher than it would be for a typical
capacitive filter system.
I expect that the secondary on that thing will be 4000, 5000, or even 6000
volts AC which is a bunch.
An email to Ted Henry may tell you all you need to know.
Don N8ECH
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
1028, 1092A 3200 VDC @ 800 ma CCS
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|