Amps
[Top] [All Lists]

Re: [Amps] Cleaning Tarnish Off Ceramic Tube

To: "amps@contesting.com" <amps@contesting.com>
Subject: Re: [Amps] Cleaning Tarnish Off Ceramic Tube
From: Richard Solomon <dickw1ksz@gmail.com>
Date: Sat, 28 Sep 2013 16:17:26 -0700
List-post: <amps@contesting.com">mailto:amps@contesting.com>
I gave Tarn-X a try, looks like it might work if I had a few days to do it.
Dipping the tube is not a good idea, I'd need a gallon of the stuff.

A couple of suggestions seem to be not available here, so I may just
learn to love the "patina", as it is called.

Doesn't look that bad, the 3-1000 on one side and the 4CX5000 on the
other side look neat and impresses non-Ham folks.

Thanks to all for the help.

73, Dick, W1KSZ


On Sat, Sep 28, 2013 at 3:47 PM, Bill and Liz <magoo@isp.ca> wrote:

> I use MAAS paste for my keys as well as radioshiny parts.  It removes the
> tarnish nicely and polishes to a luster with buffing.
>
> Bill VE3NH
> ----- Original Message ----- From: "Richard Solomon" <dickw1ksz@gmail.com>
> To: <amps@contesting.com>
> Sent: Friday, September 27, 2013 6:38 PM
>
> Subject: [Amps] Cleaning Tarnish Off Ceramic Tube
>
>
>  I have a 4CX5000A Dud that I am incorporating into a
>> tube display in the shack.
>>
>> What would be the best stuff to remove the tarnish on
>> the Plate section ?
>>
>> Tnx, Dick, W1KSZ
>> ______________________________**_________________
>> Amps mailing list
>> Amps@contesting.com
>> http://lists.contesting.com/**mailman/listinfo/amps<http://lists.contesting.com/mailman/listinfo/amps>
>>
>>
>
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>