Amps
[Top] [All Lists]

Re: [Amps] Cleaning Tarnish Off Ceramic Tube

To: Richard Solomon <dickw1ksz@gmail.com>, "amps@contesting.com" <amps@contesting.com>
Subject: Re: [Amps] Cleaning Tarnish Off Ceramic Tube
From: peter chadwick <g8on@fsmail.net>
Reply-to: g8on@fsmail.net
Date: Sat, 28 Sep 2013 21:49:14 +0200
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Goddard's Silver Dip or its US equivalent.

73

Peter G3RZP

========================================
 Message Received: Sep 28 2013, 05:15 PM
 From: "Richard Solomon" <dickw1ksz@gmail.com>
 To: "amps@contesting.com" <amps@contesting.com>
 Cc: 
 Subject: [Amps] Cleaning Tarnish Off Ceramic Tube
 
 I have a 4CX5000A Dud that I am incorporating into a
 tube display in the shack.
 
 What would be the best stuff to remove the tarnish on
 the Plate section ?
 
 Tnx, Dick, W1KSZ
 _______________________________________________
 Amps mailing list
 Amps@contesting.com
 http://lists.contesting.com/mailman/listinfo/amps
 
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>