Amps
[Top] [All Lists]

Re: [Amps] Cleaning Tarnish Off Ceramic Tube

To: "ka4inm@gmail.com" <ka4inm@gmail.com>, amps <amps@contesting.com>
Subject: Re: [Amps] Cleaning Tarnish Off Ceramic Tube
From: Glen Zook <gzook@yahoo.com>
Reply-to: Glen Zook <gzook@yahoo.com>
Date: Sun, 29 Sep 2013 14:44:02 -0700 (PDT)
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Goddard's Silver Dip is the same as Tarn-X and is available at most 
supermarkets.

Both products, when applied with a cotton swab ("Q-Tip"), do an excellent job 
on rotary switch contacts.
 
Glen, K9STH


Website:  http://k9sth.com


________________________________
 From: KA4INM <ka4inm@gmail.com>
To: amps <amps@contesting.com> 
Sent: Saturday, September 28, 2013 11:38 AM
Subject: Re: [Amps] Cleaning Tarnish Off Ceramic Tube
 

On 09/27/13 18:38, Richard Solomon wrote:

> I have a 4CX5000A Dud that I am incorporating into a
> tube display in the shack.

> What would be the best stuff to remove the tarnish on
> the Plate section ?

   Tarn-X is available in some drugstores, hardware stores and big box 
stores, find it in a black bottle with a white silk screened label.

   Rinse it off with hot water or isopropyl alcohol.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>