A 1000pf is fine for those frequencies and nothing will get thru the
Nichrome Nibbler and the last cap.
Carl
KM1H
----- Original Message -----
From: "Steve Flood" <kk7uv@bresnan.net>
To: <amps@contesting.com>
Sent: Sunday, November 10, 2013 1:47 PM
Subject: Re: [Amps] Plate Choke question
>I much prefer tossing the so called VHF choke and replacing with a
wirewound glitch resistor. The WW has inductance and serves a dual
>purpose
wheras Ive seen a few amps where the "VHF" choke cause problems.
Thanks for the advice. I'll wind a 50uH choke and use a 10-ohm 50-watt
glitch, each end bypassed with .0047 caps (idea gleaned from an earlier
topic), and perhaps an added 500pF bypass doorknob between glitch and
choke
(unless those bypass values could be optimized for 10-20m also?). I have
some ceramic/steatite standoffs that could serve as a choke form.
Steve, KK7UV
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1432 / Virus Database: 3222/6324 - Release Date: 11/10/13
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|