I wouldn't say it has "trouble". It is quite accurate, but only at it's
relatively low frequency. For higher frequencies or for measuring the
inductance of a resistor, you need an impedance analyzer ($$$).
73, Bill W6WRT
------------ ORIGINAL MESSAGE ------------
On 1/29/2014 7:32 PM, Vic Rosenthal K2VCO wrote:
It also has trouble with large tubing coils due to the distributed
capacitance. And it is not good for toroids on cores where the
permeability varies with frequency.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|