I am building a 2x813 class C final modulated by 2x813.
The typical way to bias the class C final is with a combination of
fixed bias applied to the control grid and bias derived from the rf
drive through a grid resistor.
Rather than fixed bias applied to the grid it seems that I could
achieve the same effect by using a pseudo zener in series with the
cathode, similar to what is used in cathode driven linears.
Any thoughts on this approach?
- Paul KW7Y
---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|