[Top] [All Lists]

[Amps] Hunter Bandit 2000C

Subject: [Amps] Hunter Bandit 2000C
From: Kathy Bookmiller via Amps <>
Reply-to: Kathy Bookmiller <>
Date: Sat, 28 Mar 2015 07:01:34 -0700
List-post: <">>
I just acquired an old Hunter 2000C. 
It came wired for 110V, but I plan on running it off my dedicated 220 circuit. 
I see there is only one cartridge type fuse in it and this bothers me. 
Shouldn't both sides of the line have a fuse/breaker, especially now that I'll 
put it on 220?  And if so, shouldn't they be ganged together, so if it trips, 
all voltage is removed? Or am I over thinking this?
Also, and this is a stretch, but might anyone have a meter from one available? 
The plate/volt meter got smashed in shipping and although the actual movement 
seems to be still OK, the plastic front case and actual needle part is snapped 
off. Otherwise it looks pretty clean and once I build an amp keyer, it looks 
like it would be ready to play.
Kathy, W2NK
Amps mailing list

<Prev in Thread] Current Thread [Next in Thread>
  • [Amps] Hunter Bandit 2000C, Kathy Bookmiller via Amps <=