Re: [Amps] Transmit signal monitoring AM & SSB

[donroden@hiwaay.net]

> > > I remember the old dedicated station monitors of the past.


Just remember that the old monitors are only as good as their last  
calibration.
And dried out capacitors will make the monitor inaccurate.

A cheap O-scope with a short lead wrapped around the coax will give  
you a good look at your signal.
Play with the audio levels until you *just* see the center of the audio
"kissing" on the zero line. then back off a touch.

Don W4DNR





_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps