I believe, in transmitters of this type, that the modules aren't
combined in the same way we're used to in the likes of Quadra,
PW-1 or SPE type amps - in the AM txs I think it's more like the
module outputs are connected in series akin to stacking PSUs to
get a higher voltage.
Steve
That is becoming common practice. Modular transmitters. Just
plug in the modules you want to get the power you want and I
believe they have been hot swappable for some time. .
I had never thought of switching the modules in and out, but at
250 W per step it'd be a pretty smooth transition, albeit they
may do some filtering. I wonder about switching pulses?
73
Roger (K8RI)
On 12/17/2016 9:36 AM, Bill Turner wrote:
------------ ORIGINAL MESSAGE ------------(may be snipped)
On Sat, 17 Dec 2016 05:37:07 -0500, K8RI wrote:
it's "relatively easy" to parallel properly designed circuits
through properly designed combiners for the power to be run
that give excellent linearity, rugged with minimal protective
circuitry, and good efficiency at a reasonable heat load that
is easy to get rid of. (QUIET!)
REPLY:
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|