To: | amps@contesting.com |
---|---|
Subject: | Re: [Amps] Time to back up- SS and autotune |
From: | "Roger (K8RI)" <k8ri@rogerhalstead.com> |
Date: | Sun, 18 Dec 2016 02:28:00 -0500 |
List-post: | <amps@contesting.com">mailto:amps@contesting.com> |
The modulation is applied by "reducing or controlling" the power, rather
than plate modulation which adds and subtracts, so the maximum power is
with full carrier and no modulation. Any modulation reduces the power.
IIRC 100% modulation, single tone would produce an average of 25 KW on a
50 KW signal.
73 Roger (K8RI) On 12/17/2016 9:06 PM, Bill Turner wrote: ------------ ORIGINAL MESSAGE ------------(may be snipped) On Sat, 17 Dec 2016 16:24:03 -0500, Paul wrote:I installed a Harris DX-50 as my last project before exiting the broadcast engineering profession in 1995.REPLY: Fascinating information, thanks Paul! Perhaps you can answer two questions? 1. Why does the output meter not kick up during modulation? and 2. How much does a DX-50 cost? 73, Bill W6WRT _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: [Amps] Time to back up- SS and autotune, donroden |
---|---|
Next by Date: | [Amps] Modern AM Broadcast Transmitters, donroden |
Previous by Thread: | Re: [Amps] Time to back up- SS and autotune, RCM |
Next by Thread: | [Amps] Modern AM Broadcast Transmitters, donroden |
Indexes: | [Date] [Thread] [Top] [All Lists] |