Amps
[Top] [All Lists]

Re: [Amps] RF-KIT SS AMP

To: <w8hw@xxxxxxxxxxx>, "Jim Monahan" <k1px@xxxxxxx>, <amps@xxxxxxxxxxxxxx>
Subject: Re: [Amps] RF-KIT SS AMP
From: "Jim W7RY" <jimw7ry@xxxxxxxxx>
Date: Wed, 31 May 2017 20:04:47 -0500
List-post: <mailto:amps@contesting.com>
It most certainly does include a LPF! I also talked to them at Dayton. A built in tuner is an option.

Seems to me the kit without the tuner was around $2600.00

73
Jim W7RY


-----Original Message----- From: w8hw@xxxxxxxxxxx
Sent: Wednesday, May 31, 2017 8:48 AM
To: Jim Monahan ; amps@xxxxxxxxxxxxxx
Subject: Re: [Amps] RF-KIT SS AMP

It is also missing LPF (Low Pass Filter) and that is most important, You
will need a minimum of 6 filters. Additionally you will need either a 6
position wafer switch or will need to build communication path to you your
exciter for filter selection. Perhaps other hardware.

73, Bruce, W8HW
=========================

-----Original Message----- From: Jim Monahan
Sent: Wednesday, May 31, 2017 08:26
To: amps@xxxxxxxxxxxxxx
Subject: [Amps] RF-KIT SS AMP

With all of the discussion recently about SS amps, here
is one that might be worth checking out:

http://rf-kit.de/en/2k_Kit.php

RF-KIT, a firm based in Germany, was exhibiting a legal-limit HF Amplifier
Kit at the Hamvention. The unit on display was using two LDMOS power devices
and sported a 7" color touchscreen for amplifier control and status. The kit
includes everything necessary to build the amplifier except the Raspberry Pi
3 CPU, and three fans. The company's literature states that it can be built
in less than a day.

Jim, K1PX

K1PX at msn.com
_______________________________________________
Amps mailing list
Amps@xxxxxxxxxxxxxx
http://lists.contesting.com/mailman/listinfo/amps

_______________________________________________
Amps mailing list
Amps@xxxxxxxxxxxxxx
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@xxxxxxxxxxxxxx
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>