The web page states no LPF and in the next line states it is now
included. They need to edit that page. Details do matter when advertizing
73
Roger (K8RI)
On 5/31/2017 Wednesday 9:16 PM, Tim Duffy wrote:
I have talked to them SINCE Dayton.
LPF IS INCLUDED - pay no attention to the web page.
73
Tim K3LR
-----Original Message-----
From: Amps [mailto:amps-bounces@xxxxxxxxxxxxxx] On Behalf Of
w8hw@xxxxxxxxxxx
Sent: Wednesday, May 31, 2017 9:12 PM
To: Jim W7RY; Jim Monahan; amps@xxxxxxxxxxxxxx
Subject: Re: [Amps] RF-KIT SS AMP
Hello Jim,
Read the web page on it, it says no LPF as well as a few other items are
missing.
I built one from the Russian guys and I am happy with it, but you will be
suppressed on how many things you will have to build and add to the mix.
73, Bruce, W8HW
===============
-----Original Message-----
From: Jim W7RY
Sent: Wednesday, May 31, 2017 21:04
To: w8hw@xxxxxxxxxxx ; Jim Monahan ; amps@xxxxxxxxxxxxxx
Subject: Re: [Amps] RF-KIT SS AMP
It most certainly does include a LPF! I also talked to them at Dayton. A
built in tuner is an option.
Seems to me the kit without the tuner was around $2600.00
73
Jim W7RY
-----Original Message-----
From: w8hw@xxxxxxxxxxx
Sent: Wednesday, May 31, 2017 8:48 AM
To: Jim Monahan ; amps@xxxxxxxxxxxxxx
Subject: Re: [Amps] RF-KIT SS AMP
It is also missing LPF (Low Pass Filter) and that is most important, You
will need a minimum of 6 filters. Additionally you will need either a 6
position wafer switch or will need to build communication path to you your
exciter for filter selection. Perhaps other hardware.
73, Bruce, W8HW
=========================
-----Original Message-----
From: Jim Monahan
Sent: Wednesday, May 31, 2017 08:26
To: amps@xxxxxxxxxxxxxx
Subject: [Amps] RF-KIT SS AMP
With all of the discussion recently about SS amps, here
is one that might be worth checking out:
http://rf-kit.de/en/2k_Kit.php
RF-KIT, a firm based in Germany, was exhibiting a legal-limit HF Amplifier
Kit at the Hamvention. The unit on display was using two LDMOS power devices
and sported a 7" color touchscreen for amplifier control and status. The kit
includes everything necessary to build the amplifier except the Raspberry Pi
3 CPU, and three fans. The company's literature states that it can be built
in less than a day.
Jim, K1PX
K1PX at msn.com
_______________________________________________
Amps mailing list
Amps@xxxxxxxxxxxxxx
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@xxxxxxxxxxxxxx
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@xxxxxxxxxxxxxx
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@xxxxxxxxxxxxxx
http://lists.contesting.com/mailman/listinfo/amps
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
_______________________________________________
Amps mailing list
Amps@xxxxxxxxxxxxxx
http://lists.contesting.com/mailman/listinfo/amps
|