>From personal experience, I would recommend DXengineering for the GU-74b.
These are from a new production run by Svetlana and they work great but YOU
MUST reset the bias when changing tubes or they may not run linear.
https://www.dxengineering.com/parts/dxe-gu74b
On Tue, Apr 2, 2019 at 1:32 AM Steve London <n2icarrl@gmail.com> wrote:
> So, Carl, where would you suggest us cheap, constantly crying, hams get
> new, or
> at least new-old-stock Eimac 4CX800's and 3CX800's ? Lotsa luck.
>
> 73,
> Steve, N2IC
>
> On 04/01/2019 09:08 AM, Carl wrote>>
> >> Unlike Eimac, Philips and similar manufactures who design tubes for CCS
> >> service along with plenty of reserve emission to compensate for aging.
> that
> >> tube and most amateur service Chinese are run at the edge. And cheap
> hams
> >> cry constantly.
> >>
> >> Carl
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
--
Later,
John Bodine/WU2E
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|