Amps
[Top] [All Lists]

Re: [Amps] QRO 2500DX MARK lll 4CX800

To: jim.thom@telus.net, invertech@frontierisp.net.au
Subject: Re: [Amps] QRO 2500DX MARK lll 4CX800
From: gudguyham--- via Amps <amps@contesting.com>
Reply-to: gudguyham@aol.com
Date: Thu, 4 Apr 2019 21:31:23 +0000 (UTC)
List-post: <mailto:amps@contesting.com>

##  A  dead simple,  single chinese  8877  GG  triode amp makes more sense. 
2 x  3-500Z is also dead simple..and instant on, no grid current
protection required..perhaps a simple  fast  3agc  grid fuse  at most.


If NOS 8877 tubes were like the GU-74 you bet your bibby all the amps using 
GU-74's would be 8877's

-----Original Message-----
From: Jim Thomson <jim.thom@telus.net>
To: Leigh Turner <invertech@frontierisp.net.au>
Cc: amps <amps@contesting.com>
Sent: Thu, Apr 4, 2019 12:06 pm
Subject: Re: [Amps] QRO 2500DX MARK lll 4CX800

Subject: RE: [Amps] QRO 2500DX MARK lll 4CX800


<Of course any of these amps when married up with a modern SDR exciter
<running Pure Signal IMD cancellation feedback produce truly 
state-of-the-art
<performance.

<In the Tx tetrode tube space today there are very few choices to be 
had.....

<Leigh
<VK5KLT

##  The only modern  SDR  xcvr  for sale on the market right now, 
with...Pure signal... is the  ANAN  7000  + 8000  xcvrs,
which,imo, are not ready for prime time.  Esp judging by the  37 K postings 
of various issues..on their yahoo group, that I belong to.
Pure signal will really take ahold when  Icom, Yaesu, Kenwood  start using 
it in their future products.

##  Heres  my take on tubes Leigh.  Why mess  with a tetrode in the  1st 
place ?    Tetrodes offer  ZERO
advantages  over a  high mu  GG triode.  Heck, you dont require a socket 
on  some  triodes,  nor regulated screen  supplies,  regulated
bias supplies, screen and  anode current protection,  +  compensation on the 
input for stray  tube C,  + neutralization etc, etc.

##  A  dead simple,  single chinese  8877  GG  triode amp makes more sense. 
2 x  3-500Z is also dead simple..and instant on, no grid current
protection required..perhaps a simple  fast  3agc  grid fuse  at most.

##  From a HB perspective, why bother with a complicated  mess, like the typ 
tetrode ?  A  simple  3CX-3000F7 requires no socket,  instant on,
rebuildable,  5-8 kw pep out..or  CCS cxr,  and  -59db  IMD-3.  Most hams 
will die before the tube  does.  Moot point, cuz your kids can have it 
rebuilt,
use it..then  pass it on to their kids.

Jim  VE7RF 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
<Prev in Thread] Current Thread [Next in Thread>