[Top] [All Lists]

[Amps] Henry 3K-A choke failure...workaround?

To: Amplifier Mailing List <>
Subject: [Amps] Henry 3K-A choke failure...workaround?
From: jeff millar <>
Date: Thu, 26 Sep 2019 22:07:10 -0400
List-post: <>
Hello wise ones...

Bought a nice 3K-A at a flea market and made one SSB contact.  On the
second contact it tripped off on HV overcurrent.  After some debugging, the
Plate choke is leaky to ground at HV but open with an Ohm meter.

Can I just put the choke up on insulated standoffs?

Any other suggestions?


jeff, wa1hco
Amps mailing list

<Prev in Thread] Current Thread [Next in Thread>