[Top] [All Lists]

Re: [Amps] Henry 3K-A choke failure...workaround?

To: amps <>
Subject: Re: [Amps] Henry 3K-A choke failure...workaround?
From: Ron <>
Date: Thu, 26 Sep 2019 22:59:31 -0400
List-post: <>
  Jeff wa1hco millar wrote:

Hello wise ones...

Bought a nice 3K-A at a flea market and made one SSB contact.  On the
second contact it tripped off on HV overcurrent.  After some debugging, the
Plate choke is leaky to ground at HV but open with an Ohm meter.
Can I just put the choke up on insulated standoffs?

Any other suggestions?

  It is a pleasure to be helpful.

  The CURE is to put it in the ground side of the circuit, typically
where the rectifier or the grounded side of the transformer goes to

  Ron  KA4INM - Understanding is much better than
                                      knowing how.
Amps mailing list

<Prev in Thread] Current Thread [Next in Thread>